Summary:
The article provides detailed instructions on the functions of various buttons and components of a camera. The Power Button controls the device's power state, allowing transitions between off, setup, and work modes. The Test Button is used for capturing test pictures and rebooting the device, while the Reset Button formats the internal memory and resets settings. External ports include a 12V DC port for external power sources (Note: the port will not work with a 110v outlet), and the battery compartment accommodates 12 AA batteries or a rechargeable Lipo battery. For further assistance, users are encouraged to contact support at support@tactacam.com.
Buttons:
Power Button: This button controls the power state of your camera.
- Camera Off: Press and hold for 1 second to power on the device and enter Setup Mode.
- Camera Work Mode: If the camera is actively recording (Work Mode), press and hold for 1 second to enter Setup Mode.
- Camera in Setup Mode: Press and hold for 1 second to power off the camera completely.
Test Button: This button allows you to take test pictures.
- Setup Mode: When the camera is in Setup Mode, press and hold for 1 second to capture a picture and send it to the server for testing connectivity and image quality.
- Work Mode: When the camera is in Work Mode, press and hold for 1 second to reboot the device and capture a picture, which will then be sent to the server.
- Off Mode: This button has no function when the camera is powered off.
Reset Button: This button allows you to reset the camera's settings.
- Format the Internal Memory: Press and hold for 5 seconds to clear all user data and format the internal SD card.
- Work Mode: The Camera will go into Work Mode after approximately 2 minutes.
External Ports and Compartments:
- External Battery In/DC Port (12V): This port allows you to connect an external 12-volt power source to your camera. This can be used as an alternative to the internal batteries for extended operation. This port does not work with a 110v outlet.
Battery Door Latch:
This latch secures the battery compartment. Inside, you will find:
- 12 AA Battery Slots: The camera can be powered by 12 standard AA batteries, arranged in two separate trays of 6 batteries each.
- Rechargeable Lipo Battery (5200mAh, 12V): The camera is also compatible with a 5200mAh, 12V rechargeable lithium polymer (Lipo) battery for a rechargeable power option.
Need Assistance?
If you have any questions or require further assistance, please don't hesitate to contact our support team at support@tactacam.com.