Navigating Your Camera's On-Screen Menu
This guide explains what each arrow button does from your camera's main home screen.
Up Arrow: View Camera Reel
Pressing the Up Arrow opens your camera reel, where you can view all the photos and videos stored on the SD card.
While in the Camera Reel:
- Right Arrow: Scrolls forward, starting from the most recent photo/video.
- Left Arrow: Scrolls backward, starting from the oldest photo/video.
- Down Arrow: Deletes the photo or video you are currently viewing.
- Up Arrow: Exits the camera reel and returns to the home screen.
Right Arrow: Open Main Menu
Pressing the Right Arrow opens the camera's main settings menu. This menu is organized into four tabs: Main, General, Send, and More.
To Exit: To exit this menu, use the arrows to highlight one of the top tab names (Main, General, etc.) and press the Left Arrow.
Main
- QR: Displays the camera's QR code, which is used to add the camera to the app. (Press the Left Arrow to exit the QR screen).
- Camera Info: Displays the camera's technical details:
- CAM (FW)
- SMS
- APP
- MCU
- IMEI
- MOD
- ICCID
- SN
General
- Camera Mode: Photo Only or PIC+VIDEO
- Image Size: 2.5K or 4K
- Video Size: FHD, HD, or WVGA
- Video Length: 10s, 15s, or 30s
- Night Mode: Max. Range, Balance, or Min. Blur
- Flash Power: High or Low
- Sensitivity: 0-9
- Delay: 00:00:30
- Operating Time: 00:00 - 00:00
- Format Storage: (This option will format your SD card)
- Date&Time: Auto UTC (Suggested) or Manual
Send
- Max Num/Day: Unlimited or 0-99
- Settings Check: Daily, Hybrid, or Instant
- Send Type: Timely, Once/Daily, Twice/Daily, or 4 Times/Daily
- Check-in Photo: (On/Off)
- GPS: (On/Off)
More:
- Multi Shot
- Pictures to Take: 1-5P
- Shot Interval: 0-2S
- Battery Type:
- Alkaline
- NI-MH
- Lithium
- Lith Pack
- SD Loop: On or Off
- Storage: Displays storage details:
- Usage: %
- Used: GB
- Left: GB
- Total: 5.5GB
- Firmware Upgrade:
- Reset: Resets the camera to factory settings.
Down Arrow: Check Status
Press and hold the Down Arrow to quickly display the current date, time, and cell carrier.
Left Arrow: Enter Work Mode
Press the Left Arrow to put the camera into Work Mode, making it active and ready to capture images.