Summary:
The article discusses a firmware update for Gen 1 REVEAL cameras, emphasizing the necessity of updating to the B506 firmware version, available since August 12, 2021, to ensure continued functionality and HD download capability. Cameras not updated by September 12, 2021, may stop sending photos, and users with out-of-warranty devices will incur fees for shipping and reflashing. The AB04 version, available since October 2020, remains current but lacks HD download. Instructions for checking firmware versions on the camera and app are provided.
UPDATED: 9/14/2021
Thank you for inquiring about the recent firmware update for Gen 1 REVEAL cameras. We understand this can cause inconveniences for you and we do our best to keep firmware updates to a minimum, so we only release them when absolutely necessary.
As of 8/12/2021, the B506 firmware version is available to all Gen 1 REVEAL cameras. This firmware supports HD download on Gen 1 REVEAL and will ensure your cameras continue to work flawlessly on our network as they are intended to. After 9/12/2021 we cannot guarantee how long cameras running on old firmware versions will continue to send photos.
If your camera is out of warranty and you have not installed the firmware update, you will be responsible for the shipping and reflash fees to resume camera use when it stops sending photos. We strongly suggest you update your camera firmware as soon as possible to avoid losing valuable time with your camera. All Gen 1 REVEAL cameras are required to be updated with either AB04 or B506 firmware versions; if they continue to run old firmware, they will eventually stop sending pictures and require to reflash.
If you are currently running the AB04 software version which has been available since October 2020 this is still considered current and does not require updating, however, you will not have the option for HD download.
Here is how to check your camera's firmware version on your Gen 1 REVEAL Camera:
- Setup
- Menu
- Other
- About
- (Push and HOLD the right arrow for 10 sec.)
- You will see the software version show up Ver: R1.0 3MR3RCwB506 or 3MR3RCwAB04
- If older (A601, A701, A801) then you need to update your REVEAL camera.
Here is how to check your camera's firmware version in the app:
1. In your app, click the Cameras icon at the bottom
2. Select the Camera Location
3. Select one of the icons next to the camera name (battery/signal/clock)
3. Then select 'Device Info'
4. Firmware will be listed under Firmware Version:
- If it says n/a you need to update your camera.
- If it says 3MR3RCwAB04 you do not need to update your camera (you will not receive HD images, but your camera will remain compatible with our network)