Summary:
To take a test picture with your DEFEND camera, first power it on by pressing the power button for one second, observing the Status light change from green to blue. Wait for the camera to establish a stable cellular signal, indicated by the Signal light flashing red once every second. Once connected, press the Test button for one second to capture a photo, which will be sent to your DEFEND app's photo feed for confirmation.
Steps to Take a Test Picture:
- Power On the Camera:
- Locate the power button on your DEFEND camera.
- Press and hold the power button for approximately one second.
- Observe the Status light (left) on the camera. It will first illuminate GREEN and then change to BLUE.
- Wait for Cellular Signal:
- While the Status light is blue, the camera is actively searching for a cellular carrier signal.
- It is crucial to wait until a stable cellular connection is established before attempting to take a test picture.
- Confirm Cellular Connection:
- The camera indicates a successful connection to a cellular carrier when the Signal light (right) begins to flash RED once every second.
- Take the Test Picture:
- Once the Signal light is flashing red, locate the Test button on your camera.
- Press the Test button for one second and then release it.
- This action will trigger the camera to capture a photo and immediately send it to your DEFEND app. Check your app's photo feed to confirm receipt.