Capturing a Test Photo on a Gen 1

Summary: 

This article explains how to take a single photo using your Gen 1 camera, which will then be sent to your mobile app.

1. Powering Up and Establishing Connection:
    
   • Ensure the camera's power switch is in the "Set Up" position.

   • Allow a few moments for the camera to connect to the 4G cellular network. You can verify the connection status by looking for the 4G signal indicator on the camera's display screen.

     

2. Taking the Picture:
    

   • Once the 4G connection is established, press the OK button located on the camera.
   • The camera will capture a photo and automatically transmit it to your linked mobile application.

   

Need Assistance?

If you have any questions or require further assistance, please don't hesitate to contact our support team at [e-mail].