Here are the instructions on how to pair your iPhone to your Reveal X/XB/SK WIFI. Please read all of the instructions and let us know if you need further assistance. Thank you!
-
Verify you have the most recent app version in the app store. If needed, uninstall and reinstall the app.
-
Open your app and sign in. Click “Allow” notifications
- Turn your camera to Setup mode and wait until the WIFI light starts flashing blue *this means it is in pairing mode*
- In your iPhone WIFI settings, select the Reveal network.
- Enter password Reveal2021. Once connected, your phone will say Connected without internet and the WIFI light on your camera will turn solid blue.
- Open your app, and click the person icon at the bottom of the screen
- Click Connect to Reveal X/SK
- Allow permission for Local Network access
-
You can also turn on this permission in your iPhone settings. (click Settings>Scroll to the Reveal app>toggle local network to ON)
-
-
Spinning wheel
-
Force close your app (hold finger down at bottom of screen and swipe up)
-
Reopen app and click person icon, click Connect to Reveal X/SK
-
Go through app and give permission where the app ask.
Comments
4 comments
Please note: the Gen 1 Reveal and Reveal X will NOT show the same signal strength. The Reveal X will show less signal than the Gen 1 Reveals, but that is to be expected because the signal indicator is not as accurate as the Reveal X. You should not notice a difference in pictures sent or send time.
The ap will not let me go past the plan selection when trying to add the first camera even though I have selected and paid for a plan.
Hi Joel, I sent you an email!
My reveal x says weak signal, but is next to two reveal gen 1 cams that say strong signal? What gives??
Please sign in to leave a comment.