Android Tactacam App.

Once Connected to the Tactacam App. See How to Connect to your App via WiFi for the first time Link is below;

https://tactacam.zendesk.com/hc/en-us/articles/360002543073-How-to-Connect-to-your-App-via-WiFi-for-the-first-time

The Picture above is the live preview: List from top to bottom

• Settings
• Change the resolution
• Change the mode
• Change to camera mode
• Record
• Gallery

Starting from the Top:

• White Balance
  • This will allow how much light your Tactacam will let in.
  • We recommend keeping it on Auto this way your Tactacam will automatically adjust to the lighting conditions.
• Frequency
• Date Stamp
  • You are able to turn the Date and Time ON or OFF
• Camera WiFi Configuration: 
  • Change the password of your Tactacam
    • Write down the password and keep in a safe place so you can remember it for the next hunting season.
    • Change the name of your Tactacam
• Format SD Card:
  • An easier way to format your SD card if you do not have a computer by you.
  • This will erase everything on your SD card we suggest saving the files before formatting your SD card.
• Video Size
  • Instead of on the live preview screen you are able to change the resolution of the Tactacam in this area
• Slow Motion
  • Turn the Slow Motion Feature on and off
  • Will only work when you are recording at 120 FPS (Frames per Second) 
  • This will take the sound away and allow your Tactacam to record in slow motion.
• Power on Auto record: If this feature is turned off then the Tactacam will turn on in pause                                     mode right away.
• Image stabilization: Will turn the Image stabilization ON or OFF
• Fast Motion Movie: This will make your Tactacam video play very fast.
• Wind Noise Reduction:Will reduce the wind noise 
• LED light: When this is turned off your Tactacam will be in Black out mode, the vibrations                     will tell you if you are recording or in pause mode.
• Vibration: When this is turned off your Tactacam will not vibrate, the LED lights will tell you                 if you are recording or in pause mode.
• Red Dot: This will put a red dot in the middle of the play back screen
• Flip Video: This will flip your video upside down.
• FTS Setup:
  • Top mounting will Flip the Picture in order for you to record your video in the correct position
  • Side mounting will allow your video to record in the correct position. 
• Update Camera Firmware:
  • Will put the latest software on your Tactacam
  • Make sure your Tactacam has a fully charged battery along with your smart device. The Tactacam will shut off when the software update is complete.
  • ***IMPORTANT do not interrupt your Tactacam while it is updating.

NOT ALL FEATURES LISTED ABOVE ARE ON ALL OF THE TACTACAMS.