Tactacam 5.0 Remote FAST Start Guide
1. Fully charge your camera and remote.
2. Power on your Tactacam 5.0 Remote and 5.0 camera.
3. You will need to pause the camera and remote for syncing.
4. With the camera and remote paused, place your remote to the side. Place one finger on the camera mode button and one on the camera power/record button. Preform the following within 2 seconds: Push and hold the mode button, and then push and release the power / record. NOTE: The camera's mode button needs to be held down when the cameras power /record button is pushed. You will see the remote connection number increase by 1 number. If this is the first camera synced a 1 will be displayed on the remote. (If you don’t push the power record button within 2 sec the cameras Wi-Fi will turn on.)
*For more detailed instructions and feature overviews, please visit: www.tactacam.com Highlights
After initial pairing, your remote can control up to (5) Tactacam 5.0 cameras with one button. Functions include Power ON Auto Record / PAUSE/ OFF and when not recording conserves batteries with the Auto Power off feature. All cameras and Remote will power down after 3 min when not recording. But don’t worry they all will power back on just as fast with a push of the Tactacam remote button. Tactacam Remote Technology gives you the feed back you need, all on an LCD screen: Number of connected cameras, Record length, Remote Battery life and the Green LED indicates Recording, Pause/On and Off
Tactacam Remote has been optimized at 100 feet giving you the distance and control over your cameras.
Note: Tactacam remote is only compatible with Tactacam 5.0 cameras.
5.0 Remote - Disconnecting your Cameras Info (Click Here)